Wooden Camera Shows Off New LPL Mount Adapters and Vertical Filming Conversion Kits
The Mini Vertical Camera Bracket has 1/4-20 and 3/8-16 threaded holes plus pass through slots on both the horizontal and vertical plates for attaching to tripod plates, camera bodies, and more in a vertical position. Made of durable, CNC machined aluminum, the mini bracket is 45% lighter than the full size version to accommodate smaller camera setups. Should larger camera setups be required, consider the original Vertical Camera Bracket.
Micro Touch and Go System is an industry standard, quick release system compatible with Sachtler FSB 10T, 8T, FSB 6T, and Touch and Go Plate S. Our version is lighter than other systems due to the recess designs on the receiver and plate. Once the plate is attached to the camera by included 1/4-20 and 3/8-16 screws, simply drop it into the base and the plate will snap into locked mode. Push the lever further to clamp the Quick Release Plate in place. To remove, pull the lever and push down on side release button at the same time.
Panasonic Leica L Mount to ARRI LPL Mount Adapter allows ARRI LPL Signature Prime Lenses to be used with Panasonic or Leica L Mount cameras. Other LPL lenses like Leica Thalia LPL are also compatible.
The 1/4-20 threaded hole on the bottom reduces strain on the camera mount by attaching to a tripod or the vertical lens support hole on the Unified DSLR Cage. LPL Cap included to prevent dust from entering sensor area when lens is not attached. A third tab is included for use with mount when not installed in a DSLR cage.
In their factory, Wooden Camera sets the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity.